Substructure for ceramic granite
- Clamp system:
- Standard system (G1-30.22-clamp at the rack)
- universal system (G1-30.21 / 23 stainless steel. / aluminium clamp on slide)
- reinforced system (P5-50.21)
|– clamp standard – clamp universal – clamp reinforced||– Adhesive system||– Collet system|
Standard system CTS-G1-30.22 is used when there is a foundation overlap between the slabs or walls. Bearing racks are the base on which clamps for fixing facade panels is mounted. Brackets with anchors connect the carrier rack with the base (wall).
Universal system PIFS-G1-30.21 22 is used when there is a foundation overlap between the slabs or walls. Bearing racks are the base on which clamp slides and half slide-blocks are mounted for fixing the front slab. Unilocular (hollow) closed trapezoidal cutting section in comparison with the open profile provides greater stand rigidity for bending and twisting. The total thickness of side walls, which receive wind load is 3 and 4mm. Longitudinal groove bolt rack profile does not require holes for mounting and ensures non scrolling of bolts while screw-nut tightening, which increases flexibility and mounting productivity.
Enhanced System CTS-P5-50.21 is used in the absence of overlap between the slabs of the walls, and when the septum or wall is exist. Bearing racks are the base on which clamp slides and half slide-blocks are mounted for fixing the front slab. Unilocular (hollow) closed rectangular cutting section with 2 mm wall thickness and section cutting height of 100 / 130mm provides the required rigidity and flexural strength rack. The total thickness of side walls, which can receive wind load, is 4 mm. This allows you to use the system on the facades without walls (or with weak walls) using a single-span schemes of bearing racks fixing on the overlap slabs or steel structures.
Adhesive system PIFS-G1-40.24 (hidden system) is used when the overlap between the slabs base or wall, which provides a sufficient brackets fixing of metal facade, is exist. For fixing ceramic granite facade panels adhesive system is used.
Collet System CTS-G1-40.21 (hidden system is used when the overlap between the slabs base or wall, which provides a sufficient brackets fixing of metal facade, is exist. The system has the necessary strength parameters, allows using on the objects with higness up to 120m, the life time is more than 50 years.
Advantages of facade fixing systems for ceramic granite slabs
- Using of large size ceramic stoneware slabs
- Stainless clamp of 1.5 mm thickness
- Ability to create multi-faceted facades
- The system is designed for using on high-rise buildings
- Uniform distribution of high loadings
- Mounting time reducing due to ease assembling